MITUTOYO Micrometer SERIES 293

Attribute:

High-Accuracy Digimatic Micrometer SERIES 293

Choose

Categories : Small Tools MICROMETERS

SPECIFICATIONS
Metric

Order No.
Range
Resolution
Accuracy*
Anvil/spindle faces
Mass
293-100
0 - 25mm
0.0001mm/ 0.0005mm
(switchable)
±0.5μm
ø3.2mm
400g

* Excluding quantizing error

Inch/Metric

Order No.
Range
Resolution
Accuracy*
Anvil/spindle faces
Mass
293-130
0 - 1"
000005"/.00002"
0.0001mm/0.0005mm
(switchable)
±.00002"
ø3.2mm
400g

  * Excluding quantizing error
 Technical Data

  • Measuring force: 7 to 9N
  • Power supply: Lithium battery (CR2032) x 1
  • Battery life: Approx. two years when used under normal conditions

Functions

  • Preset (ABS measurement system):
    The measurement origin can be preset to any value within the display range
    for convenience in measuring.
  • Zero-setting (INC measurement system):
    The display can be zeroed at any position of the spindle, making comparison measurement easier. Returning to the absolute-measurement mode is easily accomplished.
  • Hold:
    The displayed value is held while the spindle is withdrawn and the micrometer moved so that the display can be read at the operator's convenience. After cancelling the hold, the instrument returns to the previous measuring mode (absolute or incremental).
  • Resolution switching:
    The resolution of the display can be switched. If 0.1μm measurement is not required, the resolution can be switched to 0.5μm.
  • Function lock:
    Functions such as preset or zero-set can be locked to avoid inadvertently changing the origin position.
  • On/off:
    The power can be turned off after measurement is complete. Even after the power is turned off, the origin or last zero-set position remains in the memory.
  • Auto power off:
    Even if the power is left on, the power turns off automatically if the micrometer is not used within a 20-minute period.
  • Measurement data output:
    Measurement data can be output, allowing easy incorporation of this instrument into a statistical process control or measurement system.
  • Error alarm:
    In the unlikely event of a display overflow or calculation error, an error message is displayed and measurement stops. Measurement cannot continue until the error is corrected.
    Also, if the battery voltage drops below a certain point, the battery indicator will turn on before measurement becomes impossible, warning the user that the battery needs to be replaced.

Powered by MakeWebEasy.com
This website uses cookies for best user experience, to find out more you can go to our Privacy Policy  and  Cookies Policy