All contents

When problems arise with nuts or screws, many people often think that they are caused by the raw materials or the manufacturing process.However, in TMC's experience, it has been found that in many cases, the cause is measurement errors at just a few key points.

Many people may view a nut as just a small, inexpensive part, but in the automotive industry, a single nut can be a component that affects the safety of the entire vehicle.

Many organizations set the calibration cycle at once a year because it is a long-standing practice that seems reasonable overall. However, based on the real field experience of the TMC team, the answer is that annual calibration is not the only answer for every instrument.

This is a question the TMC team hears very often, and many customers say,"The equipment has been calibrated, but the Auditor still has follow-up questions "From real on-site experience, I can tell you that the cause doesn't lie solely in the calibration itself,but in the surrounding details that are often overlooked.Today, TMC has summarized it for you. Here are the key reasons that are commonly overlooked. ...

5 Things to Check Before Choosing a Calibration Lab to Be Audit-Ready!From our experience at the TMC team speaking with many factories over the past year, a common problem is not that they havent calibrated, but that after calibration, they still arent ready for an audit. Today, TMC would like to recommend checking these 5 points before choosing a calibration lab.

Sending for Lab vs On-site Calibration: Which One Should You Choose?This question is asked by customers to the TMC team very often because both types can be calibrated to the standard, but they are suitable for different situations. Based on real field experience, heres a simple summary to understand:

Key points that are often missed unknowingly: What should be particularly careful with production line scales? A common finding is 'the scale has passed calibration, but the problem lies in actual use on the line.' And these are the points that are often overlooked:

Many organizations believe that if the scale is still turned on and operational, and the display shows normal numbers, it means the scale is ready to use.

This is a very important matter because our team visited a customer's factory last week. The auditor opened the certificate, looked at it, and pointed to a small number, asking, 'What is this value?' At that moment, the QA team was completely silent.Heres the answer: the number is the Uncertainty value.

This is the trust story ,One customer told the TMC team after the audit thatThe scale has already been calibrated.But the auditor kept asking so many more questions that the QA team was caught off guard.

Many organizations are still complacent about continuing to use scales or measuring instruments, neglecting calibration simply because the instrument still works.But the truth is that not performing calibration can lead to unseen risks, especially directly affecting the quality of the product, and may ultimately cause harm to consumers from using a product that is not of good quality.

Why is the scale expensive? Why does it still need to be calibrated? Many organizations invest in high-priced scalesbecause they require accuracy and reliability in use.

This matter is very important, especially for QA teams. Many organizations collectively refer to them as "scales," but in reality, scales and balances have different purposes. Scales are suitable for general weighing tasks, large quantities, and moderate precision, while balances are suitable for tasks that require high accuracy, such as QC, Lab, and R&D.

Why factories should not overlook ISO/IEC 17025

How should we know when we need calibrate ? this is a big deal for factory. It's will show 5 signs that we need calibrate ISO 17025

3 Reason know before choose VMM ,Why should be ARCS VISION brand ?

A group of people who are losing weight, build muscle and are taking care of health are usually done regularly is weighing for checking their owns body weight. In fact, the experts have said that regular weighing is good thing because you can know the current weight and plan your weight control for good healthy.

Both of Industrial plants and measuring instruments are pair because of the production process in the industry requires resolution to achieve a standardized value. The main measuring Instruments are used to measure distance, width, length, height, and depth or position determination. Therefore, the basic measuring instruments that industrial must have:

Weighting or scale for nowadays had a lot of types but how did we know which one is proper for me?

When we are mention to measuring instruments for industrial, most of engineer would think about veriner caliper, micrometer and other measuring tools. Furthermore, measuring microscope Machines is the one of popular instruments to use in universal industrial.

Today, we will find the best answer for ISO 17025 or ISO / IEC 17025.

Hardness Tester is one of the materials used to measure the resistance to pressure, polish and turning of materials. Therefore, Hardness tester have many ways to test but in the metallurgy Hardness measurement will test the metal's ability to resist permanent processing when the pressure from the indenter is applied to the specimen.