Digimatic Micrometer Heads SERIES 164/350

Attribute:

หัวไมโครมิเตอร์ | Digimatic Micrometer Heads SERIES 164/350

Choose

Categories : Small Tools Micrometer Head

หัวไมโครมิเตอร์ | Digimatic Micrometer Heads SERIES 164/350

 Metric 

Order No. Range Resolution Accuracy** Stem Stem dia Spindle end Graduation Features
164-16350mm
0.001mm
±3µm
Plain
18mm
Flat
(Carbide tip)
-
350-251-30
25mm


±2µm
10mm
Standard
350-252-30W/ Clamp nut
350-253-30Plain
Spherical (SR4)
(Carbide tip)
350-254-30W/ Clamp nut
350-281-30*
Plain12mm
Flat
(Carbide tip)
350-282-30*W/ Clamp nut
350-283-30*PlainSpherical (SR4)
(Carbide tip)
350-284-30*W/ Clamp nut
350-261-30*
PlainFlat

* IP65 dust/water protection type ** Excluding quantizing error

  Inch / Metric

Order No. Range Resolution Accuracy** Stem Stem dia Spindle end Graduation Features
164-164
2"
.00005”/
0.001mm
±.00015”
Plain
0.709”
Flat
(Carbide tip)
-
350-351-30
1"


±.0001”
0.375”
Standard
350-352-30W/ Clamp nut
350-353-30Plain
Spherical (SR4)
(Carbide tip)
350-354-30W/ Clamp nut
350-381-30*
Plain0.5”
Flat
(Carbide tip)
350-382-30*W/ Clamp nut
350-383-30*PlainSpherical (SR4)
(Carbide tip)
350-384-30*W/ Clamp nut
350-361-30*
PlainFlat

 * IP65 dust/water protection type * Note: Stem diameter of IP65 type is 12mm. ** Excluding quantizing error

IP Codes (series 350)
Level 6: Dustproof
              No ingress of dust allowed.
Level 5: Protected against water jets.
              Water projected in jets against the enclosure
              from any direction shall have no harmful effects.
Battery for series 350
SR44(1 pc), 938882 for initial operation checks (standard accessory)
Battery for series 164
SR44(2 pcs.), 938882 for initial operation checks (standard accessory)
Battery life: Approx. 2.4 years under normal use
                    (for series 350-XXX)
                    Approx. 1.8 years under normal use
                    (for series 164-163, 164)
Length standard: Electromagnetic rotary sensor
Standard accessories: Reference bar, 1 pc
Spanner (301336), 1 pc (for series 350-XXX)
Screwdriver (No.05CAA952), 1pc (for series 164-163, 164)

Functions (series 164/350)
Origin point setting (ABS measurement system):
Resets the ABS origin at the current spindle position to
the minimum value of the measuring range and switches
to ABS mode.

  • Zero-setting (INC measurement system):
    A brief press on the ZERO/ABS button sets display to
    zero at the current spindle position and switches to the
    incremental (INC) measuring mode. A longer press resets
    to the ABS measuring mode.
  • Data output:
    Equipped with output port for transferring measurement
    data to a Statistical Process Control (SPC) and
    measurement system.
  • Auto power ON/OFF:
    The reading on the LCD disappears after this instrument
    is idle for about 20 minutes, but the reading and
    measurement mode are retained. Turning the spindle
    causes the reading on the LCD to reappear.
  • Error alarm:
    In case of an overflow on the LCD or a computing error,
    an error message appears on the LCD and the measuring
    function stops. This prevents an instrument from giving
    an erroneous reading. Also, when the battery voltage
    drops to a certain level, the low-battery-voltage alarm
    annunciator appears well before the micrometer becomes
    unusable.
     

Powered by MakeWebEasy.com
This website uses cookies for best user experience, to find out more you can go to our Privacy Policy  and  Cookies Policy