Dial Depth Gage SERIES 7 - 7200

Dial Depth Gage SERIES 7 - 7200 Optimal for hole, narrow groove and step measurement.

Choose

หมวดหมู่ : เกจวัดลึก

Share

Dial Depth Gage SERIES 7 - 7200

• Optimal for hole, narrow groove and step measurement.

Technical Data
Dial reading: 0.01mm or .001”
Flatness of base face: 5µm or 2µm
Contact point: Carbide-tipped ball point(needle point:7210, 7222)
Measuring force: 1.4N (2.5N: 7213, 7214, 7217, 7218)

Note:
*1
Caution should be exercised when exchanging a contact point of a Depth Gage (Dial/Digimatic Indicator)
• If a different size contact point is mounted, displacement of the contact point from the base contact surface will be changed and as a result, measurement range may not be maintained.
• A contact point cannot be mounted to a Depth Gage, if its diameter is too large for the hole diameter of the base.
• Parallelism adjustment with the bottom face of the base is required when mounting a flat contact point such as the flat/needle or carbide-tipped contact point.

*2
Caution on should be exercised when using an extension rod
• If the total length of the extension rod exceeds 110mm (4.5") use the instrument in a vertical position (contact point downward).
• Use a master gage (such as Gauge blocks) to perform zero-setting when the extension rod is mounted. (Master gage is an optional accessory.)



*3
Indicators
• Indicators for a Depth Gage is used for the Depth Gage. When the indicator is exchanged and extension rod is connected longer, the contact-point may incline signifcantly.
• Code No.543-400B / 543-402B for Depth Gage has a measuring force less than 1.5N.  

 

 Metric 

Order NoRangeGraduationStrokeAccuracyExtension RodsBase WxThicknessFlatness
72100-10mm0.01mm10mm0.015mm-40x16mm5µm
72110-200mm5pcs.(10,20,30,30,100mm)63.5x16mm
7212101.6x16mm
72130-210mm30mm0.03mm3 pcs.(30,60,90mm)63.5x16mm
72144 pcs.(30,60,90mm)101.6x16mm
72200-200mm0.015mm0.015mm5pcs.(10,20,30,30,100mm)100x18mm
722110mm150x18mm
72220-10mmØ16xmm
7223Ø25xmm
7224Ø40xmm
72310-200mm5mm63.5x16mm

 

 Inch 

Order NoRangeGraduationStrokeAccuracyExtension RodsBase WxThicknessFlatness
7217S0-8in.001in1in.002in4 pcs.(.5,1,2,4 in)2.5x63in0.0002in
7218S4x63in
7237T2in
7238T2.5x63in
Powered by MakeWebEasy.com