Metric/Inch Square Gauge Block Sets SERIES 516
คุณสมบัติสินค้า:
Metric/Inch Square Gauge Block Sets SERIES 516 — Metric Block Sets, Long Block Sets, Wear Block Sets
หมวดหมู่ : เครื่องมือวัดละเอียด ขนาดเล็ก , เกจบล๊อค ,
Gauge Blocks
Length Standards Brought to You by Mitutoyo
Metric/Inch Square Gauge Block Sets
SERIES 516 — Metric Block Sets, Long Block Sets, Wear Block Sets
• Square gauge block sets have several unique characteristics (refer to page E-2 for details.).
A wide choice is provided to best match the target applications: sets containing from 2 to 112 blocks are available.
• Mitutoyo accessory sets are available for expanding the range of square gauge block
applications, especially for rapid assembly of precision gages.
The wear to a frequently used square gauge block set can be drastically reduced by using tungstencarbide wear blocks on the ends of a stack. There are
two available, of nominal dimension 1mm and 2mm. These blocks are much more wear-resistant than steel blocks, and they also absorb most of the wear that
would otherwise occur to the blocks in the set due to contact, and therefore maximize the set's longevity.
Wear blocks are relatively inexpensive and can be readily discarded when no longer serviceable. To achieve maximum protection, the same face of each
wear block should always be wrung to a set block, so Steel 8-block set the opposite, wearing, face never touches a set block.
SPECIFICATIONS
Metric Block Sets
| Blocks per set | Order No. | Standard / grade available | Blocks included in set | ||||
| Steel | CERA | ISO/DIN/JIS | ASME | Size | Step | Qty. | |
| 112 | 516-437 516-438 516-439 516-440 — | — — — — — | — 0:-∎0 1:-∎0 2:-∎0 — | 00:-∎6 0:-∎6 1:-∎6 2:-∎6 — | 1.005 1.001-1.009 1.01-1.49 0.5-24.5 25-100 | 0.001 0.01 0.5 25 | 1 9 49 49 4 |
| 103 | 516-441 516-442 516-443 516-444 | — — — — | — 0:-∎0 1:-∎0 2:-∎0 | 00:-∎6 0:-∎6 1:-∎6 2:-∎6 | 1.005 1.01-1.49 0.5-24.5 25-100 | 1 49 49 4 | |
| 76 | 516-449 516-450 516-451 516-452 — | — — — — — | — 0:-∎0 1:-∎0 2:-∎0 — | 00:-∎6 0:-∎6 1:-∎6 2:-∎6 | 1.005 1.01-1.49 0.5-9.5 10-40 50-100 | 1 49 19 4 3 | |
| 47 | 516-457 516-458 516-459 516-460 — | — — — — — | — 0:-∎0 1:-∎0 2:-∎0 — | 00:-∎6 0:-∎6 1:-∎6 2:-∎6 — | 1.005 1.01-1.09 1.1-1.9 1-24 25-100 | 1 9 9 24 4 | |
| 32 | 516-465 516-466 516-467 516-468 — — | — — — — — | — 0:-∎0 1:-∎0 2:-∎0 — | 00:-∎6 0:-∎6 1:-∎6 2:-∎6 — | 1.005 1.01-1.09 1.1-1.9 1-9 10-30 60 | 1 | |
Metric Long Block Sets
| Blocks per set | Order No. | Standard / grade available | Blocks included in set | ||||
| Steel | CERA | ISO/DIN/JIS | ASME | Size | Step | Qty. | |
| 8 | 516-751 516-752 516-753 516-754 | — — — — | — 0:-∎0 1:-∎0 2:-∎0 | 00:-∎6 0:-∎6 1:-∎6 2:-∎6 | 125, 150, 175 200, 250 300, 400, 500 | 25 50 100 | 3 2 3 |
Metric Wear Block Sets
| Blocks per set | Order No. | Standard / grade available | Blocks included in set | ||||
| Steel | CERA | ISO/DIN/JIS | ASME | Size | Step | Qty. | |
| 2 | 516-820 516-821 | — — | 0:-∎0 1:-∎0 | — — | 1 | — — | 2 |
| 2 | 516-822 516-823 | — — | 0:-∎0 1:-∎0 | — — | 2 | — — | 2 |
*Suffx Number ( n ) for Selecting Standard and Certifcate Provided
ISO/DIN/JIS
| Suffx No. | InspectionCertifcate | Calibration Certifcate |
| JCSS | ||
| 1 | O | — |
| 6 | O | O |
ASME
| Suffx No. | InspectionCertifcate | Calibration Certifcate |
| JCSS | ||
| 1 | O | — |
![ชุดเกจบล๊อค 103 ชิ้น [Series 516]](https://image.makewebcdn.com/makeweb/r_409x409/1rNJSVrNd/Products/129.png?v=202311151122 "ชุดเกจบล๊อค 103 ชิ้น [Series 516]")
![ชุดเกจบล๊อค 87 ชิ้น [Series 516]](https://image.makewebcdn.com/makeweb/r_409x409/1rNJSVrNd/Products/132.png?v=202311151122 "ชุดเกจบล๊อค 87 ชิ้น [Series 516]")
