Holtest (Type II)-Three-point Internal Micrometers-Mitutoyo

Holtest (Type II)-Three-point Internal Micrometers-Mitutoyo

Choose

หมวดหมู่ : โฮลเทส

Share

Hardened tool-steel anvils (instead of titanium-coated carbide) for a more economically priced tool.
Same accuracy as the titanium-coated Holtest models.
For details of setting rings, refer to page C-35.
Constant-force device allows repeatable measurement.
Can measure deep holes using an Extension Rod (optional). 

Range
(mm)
L3
(mm)
L5
(mm)
12 - 20
2.6 or below
3.5
20 - 30
3.4 or below
5.2
30 - 5010
50 - 10014
100 - 30019.6 or below
13.8

 

SPECIFICATIONS


 Metric  individual

Order No.
Range
Graduation
Accuracy*1
Extension Rod (optional)
368-764
12 - 16mm
0.005mm±2µm (within 2µm)
952621 (150mm)
368-76516 - 20mm
368-76620 - 25mm±3µm (within 3µm)952622 (150mm)
368-76725 - 30mm
368-76830 - 40mm
368-76940 - 50mm
368-77050 - 63mm952623 (150mm)

368-771

62 - 75mm
368-77275 - 88mm
368-77387 - 100mm
368-774100 - 125mm±5µm (within 5µm)
368-775125 - 150mm
368-776150 - 175mm
368-777175 - 200mm
368-778200 - 225mm
368-779225 - 250mm
368-780250 - 275mm
368-781275 - 300mm

*1 Excluding quantizing error.
Accuracy: values measured across the entire measuring face.
Maximum difference: differences between the maximum and minimum values.
* Setting ring and extension rod: optional.
* It is not advisable to use measuring heads other than as supplied as a standard accessory, or widen a measuring range by using any other multiple sub-measuring heads. (The measuring accuracy in such cases is not guaranteed.)

Powered by MakeWebEasy.com