THAI METROLOGY SYSTEM CO.,LTD.

                                                                                               

                                                      

 
                                                                                                 
ROCKWELL HARDNESS TESTER
 
                                                                                                   
                                                                                                      
                                               
MANUAL SUPERFICIAL ROCKWELL HARDNESS TESTER   
DIGIROCK H SERIES

 
 
• DigiRock HR1/HS1 analogue gauge resolution is 0.5HR, 
it is useful to improve the reading accuracy than traditional 1HR resolution

• DigiRock HR1/HS1 force knob adopts the metal material to replace the plastic,
it largely improves the instrument using-life
 
• DigiRock HR1/HS1 Loading, dwell and unloading is buffering by oil pump,
it eliminates the operator s tiredness.

• DigiRock HR1/HS1 intenter protector is available to improve the using lifetime of indenter. 
 
                                       
                                                 
                                                 
                                                 
                                               
ELECTRONIC SUPERFICIAL ROCKWELL HARDNESS TESTER
DIGIROCK M SERIES

 
• DigiRock MR2/MS2 analogue gauge resolution is 0.5HR, 
it is useful to improve the reading accuracy than traditional 1HR resolution;

• DigiRock MR2/MS2 dwell time from 1to 60s can be setup by the “time key” on the panel , 
it is much convenient than the setup on the manual hardness tester;

• DigiRock MR2/MS2 force knob adopts the metal material to replace the plastic, 
it largely improves the instrument using-life;

• DigiRock MR2/MS2 loading, dwell and unloading is buffering by electronic motor automatically,
doesnt need the operator to handle it , it eliminates the human operation error maximally;

• DigiRock MR2/MS2 intenter protector is available to improve the using lifetime of indenter.
 
                              
                                                 
                                                 
                                                 
                                               
TOUCH SCREEN DIGITAL SUPERFICIAL ROCKWELL HARDNESS TESTER 
DIGIROCK D SERIES

 
• Half automatic hardness tester except for loading preliminary force and knob.

• Operation is very convenient and fast.

• Color touch screen, displays loading force, indenter type, dwell time, and conversion scale.

• Motorized control of loading, dwell and unloading, eliminates error by manual operation. 

• Built-in auto compute max, min, mean and deviation value, resolution is 0.1HR, 
largely improving accuracy.

• Auto hardness conversion to other scales, no need to check conversion table, 
therefore improving working efficiency.

• Support multiple languages, English, Turkish, German, etc. 

• Convenient for local customers operation. 

• Save 2000 single testing results and 1000 group results for reviewing and analysis

• Optional blue tooth mini printer is available

                                                 
                                                 
                                                 
                                             
ELECTRONIC TWIN ROCKWELL HARDNESS TESTER 
DIGIROCK SR2  

 
• DigiRock SR2 can test both Rockwell and Superficial Rockwell hardness scales. 

 Manually switch 3kgf and 10kgf initial force, to test Rockwell and 
superficial Rockwell scales.

• Dial reading, resolution is 0.5HR. 

• Motorized loading/dwelling/unloading to make precision force and excellent results.
 
                                  
                                                 
                                                 
                                                 
                                             
FULL-AUTO ROCKWELL HARDNESS TESTER 
IROCK SERIES


• A kind of Full-auto Intelligent Digital Rockwell Hardness Tester, 
available to test Rockwell and Superficial Rockwell hardness automatically. 
 
• Auto calculating and displaying test result, Max, Min, Ave, and hardness deviation. 
Resolution is 0.1HR. 
 
• Available to set up upper and lower limit, with the function of over-error warning, 
data analysis chart, single test and group test.

• With software compensation function, available to compensate ±3HR, 
need not mechanical adjustment.  
 
• Available to save 2000 single test results and 1000 group test results. 
Can realize data viewing and analysis 
 
• With optional wireless Bluetooth printer, there is no need to record results and report by hand. 
 
• With optional data analysis software and Bluetooth receiver to input and analyze data.  
 
                                   
     
                                                 
                                                 
                                                 
                                                 
DIGITAL TWIN ROCKWELL HARDNESS TESTER
IROCK TR2


• Semi-automatic intelligent Digital Rockwell Hardness tester, 
you can automatically test the Rockwell hardness and surface Rockwell hardness measurement;

• Automatic variable load, automatic loading, automatic unloading, 
automatic conversion, automatic measurement;

 • Automatically calculate and display the measured value, the maximum value, 
the minimum value, the average value and the hardness value deviation, 
the display shows the resolution 0.1HR;

• There are functions such as hardness upper and lower limit settings, tolerance alarms, 
data graph analysis, average and (single point) batch measurement modes;

• Software compensation function, the machine can be ± 3HR software compensation,
no need to open the top cover for mechanical adjustment; 

• Optional Bluetooth wireless printer to print the measurement data, 
no need to manually record and write test data;
 
                          
     
                                               
  
                                                 
                                                 
                                             
ADVANCED DIGITAL TWIN ROCKWELL HARDNESS TESTER
SHR-N SERIES


•Twin tester--Regular Rockwell & Rockwell Superficial hardness for metal and plastic material 

• Horizontal protrudent indenter design, also suitable for internal and external testing 

• Testing on surfaces difficult to reach. Testing internal surface of rings and tubes with diameters over 23mm 

• Testing force is set automatically according to testing scale 

• Provided with many features such as high measuring precision, 
wide measuring range with 30 Rockwell scales   

• Measuring results are digitally displayed and can be printed, 
or transmitted to external computer automatically by USB or RS-232 cable

• Test value can be transformed to the value of HB, HV, HK and σb value 

• The tester meets all the following standard such as ISO 6508-2, ASTM E18. 
 
                                             
 
                                                 
                                                 
                                                 
                                               
AUTOMATIC ROCKWELL & SUPERFICIAL HARDNESS TESTER
SHR-145AN

 
• Twin tester--Regular Rockwell & Rockwell Superficial hardness for metal and plastic material. 

• Horizontal Protrudent Indenter Design, suitable also for internal and external testing. 

• Testing on Surfaces difficult to reach. 

• Testing internal surface of rings and tubes with diameters over 23mm. 

• Testing force is set automatically according testing scale. 

• Provided with many features such as high measuring precision, wide measuring range with 
30 Rockwell scales. 

• The tester is suitable for testing of carbon steel, alloy steel, cast iron, 
non ferrous metal. 

• Measuring results digitally displaying and can be printed, 
or transmitted to external computer automatically by USB or RS-232 data output port.

• Test value can be converted to the value of HB, HV, HK and σb value.

• The tester meeting all the following standard such as ISO 6508-2, ASTM E18. 
 
                                    
 
                                                 
                                                 
                                                 
                                                 
 
 
 
  
 

  สถิติคนเข้าชมเว็บ
189638